IfcCurveBoundedPlane

Definition from ISO/CD 10303-42:1992: The curve bounded surface is a parametric surface with curved boundaries defined by one or more boundary curves. The bounded surface is defined to be the portion of the basis surface in the direction of N x T from any point on the boundary, where N is the surface normal and T the boundary curve tangent vector at this point. The region so defined shall be arcwise connected.

Definition from IAI: The IfcCurveBoundedPlane is a specialized bounded surface class that deals only with bounding basis plane surfaces. The definition varies from STEP as outer and inner boundaries are separated attributes and refer to IfcCurve. The only basis surface that is allowed is of type IfcPlane, and the implicit_outer attribute has not been incorporated, since only unbounded surfaces are used as basis surface.

The BasisSurface is an IfcPlane that establishes the position coordinate system by SELF\IfcElementarySurface.Position. The OuterBoundary and the InnerBoundaries (if provided) shall lie on the surface of IfcPlane. Therefore the IfcCurve's establishing the outer and inner boundaries shall be:

either a 2D curve within the XY plane of the position coordinate sytem of IfcPlane
or a 3D curve with all coordinates having a z value = 0.

NOTE Corresponding STEP entity curve_bounded_surface has been changed to meet the specific requirements of an easy representation of curve bounded planes.

HISTORY New entity in IFC Release 1.5
IFC2x PLATFORM CHANGE: The data type of the attribute OuterBoundary and InnerBoundaries has been changed from Ifc2DCompositeCurve to its supertype IfcCurve with upward compatibility for file based exchange.

EXPRESS specification:

ENTITY IfcCurveBoundedPlane

SUBTYPE OF (

IfcBoundedSurface);

BasisSurface

IfcPlane;

OuterBoundary

IfcCurve;

InnerBoundaries

SET OF IfcCurve;

DERIVE

Dim

IfcDimensionCount := BasisSurface.Dim;

END_ENTITY;

Attribute definitions:

BasisSurface	:	The surface to be bound.
OuterBoundary	:	The outer boundary of the surface.
InnerBoundaries	:	An optional set of inner boundaries. They shall not intersect each other or the outer boundary.
Dim	:	The space dimensionality of this class, defined by the dimensionality of the basis surface.

Inheritance graph

ENTITY IfcCurveBoundedPlane;

ENTITY IfcRepresentationItem;

INVERSE

LayerAssignments

SET OF IfcPresentationLayerAssignment FOR AssignedItems;

StyledByItem

SET [0:1] OF IfcStyledItem FOR Item;

ENTITY IfcGeometricRepresentationItem;

ENTITY IfcSurface;

ENTITY IfcBoundedSurface;